Dust and erosion control · Construction sites and quarries

Dust control for construction sites, quarries and stockpiles

Igugu Industries supplies site and quarry dust control for construction sites, quarries and plants: a binder for site and haul roads, a crusting agent for stockpiles and ground that is not driven on, and a wetting additive for spray systems. Tell us what needs to stay down and we advise the product, the dosage and how to apply it. In drums, flowbins or bulk, depending on the product, delivered to all nine provinces.

Three places the dust comes from.

On a construction site or in a quarry, dust comes from three places. Each one needs a different answer, so we ask which one you have.

  • The roads and yards. Trucks lift the fines off site roads, haul roads and yards. A binder in the water cart holds the fines to the road.
  • The stockpiles and bare ground. Wind lifts dust off stockpiles, dumps and exposed soil. A crusting agent binds the surface.
  • The plant. Dust rises at conveyors, crushers, screens and tips. A wetting additive in the spray water helps the water wet the dust and the material.
Cut-away site block showing three dust sources: a dump truck lifting dust off a haul road, a crusted stockpile in the wind, and a conveyor with sprays at its transfer point. A legend matches them to DustBinder, DustSkin and SuperWetter.
The three places dust comes from, and the answer for each. Tap to enlarge.

Sites differ in material, traffic and weather, so we do not promise one figure for all of them. We advise the product and the dosage for your site.

Dust suppression for site roads, haul roads and yards

Plain water dries out and has to be put on again. These three products go into your water cart. The same products are on the road dust suppressant block of our dust suppression page.

Also written as: dust suppression for construction sites, construction site dust control, dust control quarry, quarry haul road dust, site road dust suppression, dust palliative, dust binder, dust suppression chemical.

Stockpile dust control and spray systems

For ground that is not driven on, and for water that is sprayed. Not for roads: a crusting agent is for stockpiles, dumps and bare ground.

  • A crust on the surface

    DustSkin Material Binder

    When: stockpiles (slopes and flat tops), dumps and exposed soil. A polymer-based binder, sprayed on by water cart or sprayer. It forms a crust that stops dust lifting off, effective from 1 day to 6 months.

  • Into the spray water

    SuperWetter Binding & Wetting Agent

    When: spray, mist and fog systems at conveyors, crushers, screens, tips and stockpiles, and water-truck cannons. Dosed into the water (we advise the dosage for your job), it helps the water wet the dust and the material.

Also written as: stockpile dust control, stockpile dust suppression, dust crusting agent, wind erosion control, dust suppression additive, misting system additive, dust suppression spray system.

How the products go on

  • Binders through the water cart. DustBinder Lignin and DustBinder Bitumen are mixed into the water cart at 50–1,000 L per 10,000 L of water, depending on road and site conditions, and sprayed on the road.
  • Hydrogel at the fill point. It is dosed into the water-filled cart, by a dosing pump or by hand from 20 L containers, and goes on with your normal watering.
  • DustSkin by water cart or sprayer. It is sprayed on, or mixed with water on site. We advise the dosing for your surface.
  • SuperWetter into the water. It is dosed into the system water or the water of a water-truck cannon. We advise the dosage for your job.

For any other dosage, we advise it for your job.

What to send for a quote

  • What needs treating: roads, stockpiles or bare ground, or a spray system.
  • For roads: the length and width, the traffic, your water cart size and how often you water now.
  • For stockpiles: the area in m² (a map outline helps), the material and how long the crust must hold.
  • For spray systems: the system type, the water flow and the operating hours.
  • One-off or ongoing supply, and the delivery site.

Technical support

Technical support comes with the supply: product selection, dosage and application guidance for the job and its specification. Tell us the job, the material and the specification, and we recommend what to use and how to apply it.

How to order

WhatsApp 084 556 8888 with what needs treating, the quantity and the delivery site, or e-mail sales@iguguindustries.co.za. Attach the RFQ or the BOQ if you have one. We reply with a quote, and the quote confirms the pack and the delivery date.

Quoting an RFQ

RFQs for site and quarry dust control may ask for “dust suppression”, a “dust palliative”, “stockpile dust control” or a “dust crusting agent”. Send the RFQ number, the closing date, the quantities and the delivery point, and we quote every line we supply against your specification. See supply for contractors.

Igugu Industries is B-BBEE Level 1, 100% black-woman-owned and CSD registered.

Buying for a tender or RFQ

Igugu Industries is B-BBEE Level 1, 100% black-woman-owned and registered on National Treasury’s Central Supplier Database (CSD). Vendor details and compliance documents are sent on request, with data sheets and safety data sheets for the products on your quote.

Questions buyers ask

Questions about site and quarry dust control.

How do I keep dust down on a construction site?

First find where it comes from. For site roads and yards, put a binder such as DustBinder Lignin into the water cart. For stockpiles and bare ground, spray a crusting agent such as DustSkin. For spray systems, dose SuperWetter into the water. Tell Igugu Industries which one you have and we advise the product and the dosage.

Can I put the product into my own water cart?

Yes, for the road products. DustBinder Lignin and DustBinder Bitumen are mixed into the water cart and sprayed on, and Hydrogel is dosed in at the fill point. Send us the size of your cart and we advise the dose per load.

What is the difference between a road binder and a crusting agent?

A road binder is for ground that traffic drives on. A crusting agent, such as DustSkin, is for ground that is not driven on: stockpiles, dumps and exposed soil. Using the right one for the surface matters, so tell us where it goes.

Do you supply quarries and crushing plants?

Yes. Igugu Industries supplies the haul road binders for the roads, DustSkin for stockpiles, and SuperWetter for spray systems at conveyors, crushers, screens and tips. Send us the site, what needs treating and the delivery point.

Our RFQ asks for “stockpile dust control” or “dust suppression”. Can you quote?

Yes. Send the RFQ number, the closing date, the quantities and the delivery point, and Igugu Industries quotes the lines it supplies against your specification. Data sheets and safety data sheets are supplied on request.

How do I order, and how is it packed?

WhatsApp 084 556 8888, e-mail sales@iguguindustries.co.za or send the RFQ. The products come in drums, flowbins or bulk, depending on the product, and the quote confirms the pack and the delivery date.

Delivered to site, mine, plant or depot in all nine provinces, with quick lead times. Tell us the site and the date you need it, and the quote confirms delivery. Delivery details

Contact

Request a quote.

Send the product, the quantity, the delivery site and the date you need it. Holding an RFQ, tender or BOQ? Send it whole: we price every line we supply and tell you which lines we do not.

Talk to us directly

WhatsApp 084 556 8888
Head office
1225 Keyser Avenue, Queenswood
Pretoria, Gauteng, 0186
WhatsApp